PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2810H37-010
2810H37-010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS OVERALL, hole_diameter: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.120 INCHES NOMINAL IN, aperture_width: 0.600 INCHES NOMINAL IN, overall_length: 7.120 INCHES NOMINAL IN, aperture_length: 2.600 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-7717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2810H37-010
NSN: 5330-00-118-7717
FSC: 5330
CAGE: 81996 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialASBESTOS OVERALL
hole_diameter0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.120 INCHES NOMINAL IN
aperture_width0.600 INCHES NOMINAL IN
overall_length7.120 INCHES NOMINAL IN
aperture_length2.600 INCHES NOMINAL IN
special_features2 APERATURES ALONG SAME CENTRAL LINE
inside_corner_radius0.300 INCHES NOMINAL IN
outside_corner_radius0.560 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationAMS3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-118-7717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2810H37-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE LENGTH: 2.600 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ASBESTOS OVERALL
•
APERTURE WIDTH: 0.600 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
APERTURE LENGTH2.600 INCHES NOMINAL IN
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS OVERALL
OVERALL WIDTH1.120 INCHES NOMINAL IN
APERTURE WIDTH0.600 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURES2 APERATURES ALONG SAME CENTRAL LINE
OVERALL LENGTH7.120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
49724Interchangeable
interchangeable cross-reference
interchangeable
R51Interchangeable
interchangeable cross-reference
interchangeable
15124Interchangeable
interchangeable cross-reference
interchangeable
80241Interchangeable
interchangeable cross-reference
interchangeable
70424Interchangeable
interchangeable cross-reference
interchangeable
AS70424Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2810H37-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2810H37-010?
2810H37-010 is a GASKET.
What parts can replace 2810H37-010?
There are 6 known substitutes for 2810H37-010: 49724, R51, 15124 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2810H37-010?
2810H37-010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-7717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2810H37-010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026