PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M0-12-N
M0-12-N ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OR STEEL RETAINER, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND OIL GROOVE IN OUTER RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M0-12-N
NSN: 3110-00-120-4366
FSC: 3110
CAGE: 39317 — MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING. (USA)
SPECIFICATIONS
materialCOPPER ALLOY OR STEEL RETAINER
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE AND OIL GROOVE IN OUTER RING
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.2500 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-120-4366
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M0-12-N · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 1.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
BORE DIAMETER0.7500 INCHES NOMINAL IN
LUBRICATION MATERIALOIL LUBRICATING
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH0.7500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
7153Interchangeable
interchangeable cross-reference
interchangeable
M0-12-NInterchangeable
interchangeable cross-reference
interchangeable
180230Interchangeable
interchangeable cross-reference
interchangeable
A8241-403 / 823Interchangeable
interchangeable cross-reference
interchangeable
2140-0094Interchangeable
interchangeable cross-reference
interchangeable
OL-7153Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M0-12-N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M0-12-N?
M0-12-N is a BEARING,ROLLER,NEEDLE.
What parts can replace M0-12-N?
There are 23 known substitutes for M0-12-N: 7153, M0-12-N, 180230 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M0-12-N?
M0-12-N is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4366. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M0-12-N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026