PartsTable
Technical Data Sheet
PartsTable / O-RING / 701902
701902 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

VALVE,LINEAR,DIRECTIONAL CONTROL. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, center_hole_diameter: 1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-477-0229, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701902
NSN: 5331-00-477-0229
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
center_hole_diameter1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-477-0229
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 701902 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
CENTER HOLE DIAMETER: 1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
CENTER HOLE DIAMETER1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
2-133Interchangeable
interchangeable cross-reference
interchangeable
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
BAC1503-4205Interchangeable
interchangeable cross-reference
interchangeable
QQA200-11Interchangeable
interchangeable cross-reference
interchangeable
73466Interchangeable
interchangeable cross-reference
interchangeable
A9134Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 701902?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701902?
701902 is a VALVE,LINEAR,DIRECTIONAL CONTROL.
What parts can replace 701902?
There are 24 known substitutes for 701902: 2-133, ASTM B221, BAC1503-4205 and 21 more. Substitute compatibility should be verified for your specific system.
Is 701902 still available?
701902 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701902

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026