PartsTable
Technical Data Sheet
PartsTable / MRO / A9134
A9134 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: RUBBER OVERALL, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_width: 1.375 INCHES NOMINAL IN, body_height: 1.625 INCHES NOMINAL IN, body_length: 0.562 INCHES NOMINAL IN, body_diameter: 0.400 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-065-4412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A9134
NSN: 5330-00-065-4412
FSC: 5330
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
materialRUBBER OVERALL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_width1.375 INCHES NOMINAL IN
body_height1.625 INCHES NOMINAL IN
body_length0.562 INCHES NOMINAL IN
body_diameter0.400 INCHES NOMINAL IN
inclosure_typeOPEN
hardness_rating35.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
inductance_typeFIXED
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
terminal_length2.250 INCHES MINIMUM IN
outside_diameter0.780 INCHES NOMINAL IN
NSN5330-00-065-4412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A9134 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
OUTSIDE DIAMETER: 0.780 INCHES NOMINAL IN
•
MATERIAL: RUBBER OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
OUTSIDE DIAMETER0.780 INCHES NOMINAL IN
MATERIALRUBBER OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
A9134Interchangeable
interchangeable cross-reference
interchangeable
2133Interchangeable
interchangeable cross-reference
interchangeable
TTI2133Interchangeable
interchangeable cross-reference
interchangeable
XF1817-10Interchangeable
interchangeable cross-reference
interchangeable
K1109PC9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A9134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A9134?
A9134 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace A9134?
There are 5 known substitutes for A9134: A9134, 2133, TTI2133 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A9134?
A9134 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-065-4412. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A9134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026