PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7001423
7001423 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: STEEL, design_type: FRICTION, overall_diameter: 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, opening_inside_diameter_for_which_designed: 0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-700-1423, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7001423
NSN: 5340-00-700-1423
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
design_typeFRICTION
overall_diameter0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
end_item_identificationW/S:AIRCRAFT, T-39; 485L TACS; VEHICLE, COMMERCIAL UTILITY CARGO (CUCV); COMMUNICATIONS PROGRAM, COMBAT THEATER (TRI-TAC) 478I
opening_inside_diameter_for_which_designed0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
NSN5340-00-700-1423
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7001423 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
•
MATERIAL: STEEL
•
OVERALL DIAMETER: 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
MATERIALSTEEL
END ITEM IDENTIFICATIONW/S:AIRCRAFT, T-39; 485L TACS; VEHICLE, COMMERCIAL UTILITY CARGO (CUCV); COMMUNICATIONS PROGRAM, COMBAT THEATER (TRI-TAC) 478I
OVERALL DIAMETER0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
11611Interchangeable
interchangeable cross-reference
interchangeable
00911611Interchangeable
interchangeable cross-reference
interchangeable
9-11611Interchangeable
interchangeable cross-reference
interchangeable
260-0325-00Interchangeable
interchangeable cross-reference
interchangeable
TYPEFInterchangeable
interchangeable cross-reference
interchangeable
SM-B-148637Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7001423?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7001423?
7001423 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 7001423?
There are 25 known substitutes for 7001423: 11611, 00911611, 9-11611 and 22 more. Substitute compatibility should be verified for your specific system.
Is 7001423 still available?
7001423 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7001423

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026