PartsTable
Technical Data Sheet
Download PDF

700049 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

700049: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: ALUMINUM ALLOY BODY, body_style: SINGLE CONNECTION, STRAIGHT FLOW, end_radius: 0.438 INCHES NOMINAL IN, fork_depth: 1.188 INCHES NOMINAL IN, body_length: 0.422 INCHES NOMINAL IN, shank_length: 1.546 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-071-2532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 700049
NSN: 5340-00-071-2532
NIINs: 000712532, 004174139, 008797978, 010861675, 011434571
FSC: 5340 — Hardware, Commercial
CAGE: 03104 — TELEDYNE BROWN ENGINEERING, INC. DBA TELEDYNE TURBINE ENGINES DIV TELEDYNE TURBINE ENGINES (USA)
SPECIFICATIONS
materialALUMINUM ALLOY BODY
body_styleSINGLE CONNECTION, STRAIGHT FLOW
end_radius0.438 INCHES NOMINAL IN
fork_depth1.188 INCHES NOMINAL IN
body_length0.422 INCHES NOMINAL IN
shank_length1.546 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
thread_class3A ROD CONNECTION A
body_diameter0.125 INCHES NOMINAL IN
bore_diameter0.7680 INCHES MINIMUM AND 0.7710 INCHES MAXIMUM IN
hole_diameter0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
overall_width0.3750 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM IN
terminal_typeWIRE LEAD
NSN5340-00-071-2532
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 700049 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.189 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.120 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.438 INCHES NOMINAL IN
•
THREAD LENGTH: 0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM ROD CONNECTION IN
•
SHANK LENGTH: 1.546 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.189 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
FORK SPAN WIDTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
FORK ARM THICKNESS0.120 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.438 INCHES NOMINAL IN
THREAD LENGTH0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM ROD CONNECTION IN
SHANK LENGTH1.546 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.745 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
MS21253-4LLReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-8878Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 700049?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700049?
700049 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 700049?
There are 2 known substitutes for 700049: MS21253-4LL, MIL-DTL-8878. Substitute compatibility should be verified for your specific system.
What is the NSN for 700049?
700049 is cataloged in the U.S. Government catalog under NSN 5340-00-071-2532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700049

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.