PartsTable
Technical Data Sheet
700-225-433 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 1.859 INCHES NOMINAL IN, cross-sectional_height: 0.139 INCHES NOMINAL IN, end_item_identification: AC CHILLED WATER PUMP, material_document_and_classification: ASTM D1418 CL FKM ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1944, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
700-225-433
NSN: 5331-00-165-1944
FSC: 5331 — O-RING
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
center_hole_diameter1.859 INCHES NOMINAL IN
cross-sectional_height0.139 INCHES NOMINAL IN
end_item_identificationAC CHILLED WATER PUMP
material_document_and_classificationASTM D1418 CL FKM ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyO-RING-SHAFT SLEEVE
NSN5331-00-165-1944
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 700-225-433 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE: 125 MAXIMUM
CENTER HOLE DIAMETER: 1.841 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER: 2.111 INCHES MINIMUM AND 2.163 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER1.841 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER2.111 INCHES MINIMUM AND 2.163 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
R149P225AInterchangeable
interchangeable cross-reference
interchangeable
5330PL0631687Interchangeable
interchangeable cross-reference
interchangeable
J221P225Interchangeable
interchangeable cross-reference
interchangeable
812-14Interchangeable
interchangeable cross-reference
interchangeable
51543Interchangeable
interchangeable cross-reference
interchangeable
11-81342Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700-225-433?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700-225-433?
700-225-433 is a O-RING.
What parts can replace 700-225-433?
There are 19 known substitutes for 700-225-433: R149P225A, 5330PL0631687, J221P225 and 16 more. Substitute compatibility should be verified for your specific system.
Is 700-225-433 still available?
700-225-433 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700-225-433