PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0631687
5330PL0631687 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include color: BLACK, center_hole_diameter: 1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, specification/standard_data: 07482-J221 MANUFACTURERS STANDARD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-0090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0631687
NSN: 5330-00-108-0090
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
colorBLACK
center_hole_diameter1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
specification/standard_data07482-J221 MANUFACTURERS STANDARD
NSN5330-00-108-0090
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0631687 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 07482-J221 MANUFACTURERS STANDARD
•
CENTER HOLE DIAMETER: 1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
COLOR: BLACK
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA07482-J221 MANUFACTURERS STANDARD
CENTER HOLE DIAMETER1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
COLORBLACK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
878225Interchangeable
interchangeable cross-reference
interchangeable
PRP568-225-975-75Interchangeable
interchangeable cross-reference
interchangeable
2-225 V747-75Interchangeable
interchangeable cross-reference
interchangeable
J221P225Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0631687?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0631687?
5330PL0631687 is a PACKING,PREFORMED.
What parts can replace 5330PL0631687?
There are 4 known substitutes for 5330PL0631687: 878225, PRP568-225-975-75, 2-225 V747-75 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0631687?
5330PL0631687 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-0090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0631687

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026