PartsTable
Technical Data Sheet
PartsTable / MRO / 70-028-000
70-028-000 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include body_width: 0.130 INCHES MAXIMUM IN, body_height: 0.260 INCHES MAXIMUM IN, body_length: 0.260 INCHES MAXIMUM IN, body_diameter: 0.438 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, cubic_measure: 1.463 CUBIC INCHES, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-100-2560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 70-028-000
NSN: 5905-00-100-2560
FSC: 5905
CAGE: 12436 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DIV BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC (USA)
SPECIFICATIONS
body_width0.130 INCHES MAXIMUM IN
body_height0.260 INCHES MAXIMUM IN
body_length0.260 INCHES MAXIMUM IN
body_diameter0.438 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
cubic_measure1.463 CUBIC INCHES
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
terminal_typeFERRULE
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
quality_factor44 MINIMUM SINGLE COMPONENT SINGLE WINDING
mounting_methodTERMINAL SINGLE GROUP
style_designatorAXIAL TERMINAL EACH END
NSN5905-00-100-2560
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND TITLE COMPONENT PN 70-028-000 MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
TEST DATA DOCUMENT: 81349-MIL-R-26 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -260.0 TO 260.0
•
BODY DIAMETER: 0.438 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 350.0
•
CUBIC MEASURE: 1.463 CUBIC INCHES
•
BODY LENGTH: 2.813 INCHES MINIMUM AND 3.312 INCHES MAXIMUM IN
•
AMBIENT TEMP AT FULL RATED POWER: 25.0 CELSIUS DEGC
•
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER: 350.0
TECHNICAL CHARACTERISTICS (FLIS)
TEST DATA DOCUMENT81349-MIL-R-26 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-260.0 TO 260.0
BODY DIAMETER0.438 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 350.0
CUBIC MEASURE1.463 CUBIC INCHES
BODY LENGTH2.813 INCHES MINIMUM AND 3.312 INCHES MAXIMUM IN
AMBIENT TEMP AT FULL RATED POWER25.0 CELSIUS DEGC
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER350.0
POWER DISSIPATION RATING IN WATTS29.000 FREE AIR
INCLOSURE TYPEENCAPSULATED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
28061-6R25Interchangeable
interchangeable cross-reference
interchangeable
572981Interchangeable
interchangeable cross-reference
interchangeable
10-912-2-05Interchangeable
interchangeable cross-reference
interchangeable
1461-2Interchangeable
interchangeable cross-reference
interchangeable
10025905-103Interchangeable
interchangeable cross-reference
interchangeable
136685-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70-028-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-028-000?
70-028-000 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 70-028-000?
There are 15 known substitutes for 70-028-000: 28061-6R25, 572981, 10-912-2-05 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-028-000?
70-028-000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-100-2560. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-028-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026