PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 136685-001
136685-001 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SEAL, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1960 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-917-6115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
136685-001
NSN: 3110-00-917-6115
FSC: 3110
CAGE: 18338 — XEROX CORP XEROX DOCUMENTATION AND SOFTWARE SERVICES (USA)
SPECIFICATIONS
materialRUBBER SEAL
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1960 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter0.6250 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN3110-00-917-6115
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 136685-001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OUTER RING
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.1960 INCHES NOMINAL IN
BORE DIAMETER0.2500 INCHES NOMINAL IN
MATERIALSTEEL OUTER RING
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SEAL QUANTITY2
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
70028Interchangeable
interchangeable cross-reference
interchangeable
70028-000Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-26/1Interchangeable
interchangeable cross-reference
interchangeable
28061-6R25Interchangeable
interchangeable cross-reference
interchangeable
572981Interchangeable
interchangeable cross-reference
interchangeable
10-912-2-05Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 136685-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 136685-001?
136685-001 is a BEARING,BALL,ANNULAR.
What parts can replace 136685-001?
There are 14 known substitutes for 136685-001: 70028, 70028-000, MIL-R-26/1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 136685-001?
136685-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-917-6115. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 136685-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026