PartsTable / O-RING / 6V8002
6V8002
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN, center_hole_diameter: 3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1956, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
6V8002
NSN: 5331-00-165-1956 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM temp_rating -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF hardness_rating 75.0 SHORE DUROMETER A NOMINAL outside_diameter 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN center_hole_diameter 3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-165-1956
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 6V8002
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN
• HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
• CENTER HOLE DIAMETER: 3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• ELONGATION PERCENTAGE: 125 MAXIMUM
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN HARDNESS RATING 75.0 SHORE DUROMETER A NOMINAL CENTER HOLE DIAMETER 3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN ELONGATION PERCENTAGE 125 MAXIMUM MATERIAL RUBBER FLUOROCARBON CLASS FPM TEMP RATING -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
7276 Interchangeable interchangeable cross-reference
interchangeable
309-10 Interchangeable interchangeable cross-reference
interchangeable
4000-6 Interchangeable interchangeable cross-reference
interchangeable
309A10 Interchangeable interchangeable cross-reference
interchangeable
292-6220 Interchangeable interchangeable cross-reference
interchangeable
GGG-D-641 SZ1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 6V8002?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6V8002?
6V8002 is a O-RING.
What parts can replace 6V8002?
There are 21 known substitutes for 6V8002: 7276, 309-10, 4000-6 and 18 more. Substitute compatibility should be verified for your specific system.
Is 6V8002 still available?
6V8002 is currently cancelled.