PartsTable
Technical Data Sheet
PartsTable / MRO / 309-10
309-10 ✓ Verified by PartsTable
Beko · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Quickly and easily insert a USB cable without looking<br>- Reversible USB Type A connector to 5-pin USB Type Micro-B Male<br>- Flat TPE cable construction for increased flexibility and portability<br>- Fully compliant with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec<br>- Ideal for use as a replacement USB lead for your smartphone, tablet, digital camera, MP3 player, DV Camcorder etc. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-168-6160, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 309-10
NSN: 5330-00-168-6160
FSC: 5330
CAGE: 60674 — MICROWAVE DEVICES INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
body_length1.500 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
corner_shapeROUND ALL CORNERS
hole_diameter0.2130 INCHES NOMINAL FIRST IN
terminal_typeTAB W/SCREW
exterior_colorBLACK
overall_length0.8200 INCHES MINIMUM AND 0.8240 INCHES MAXIMUM IN
proof_pressure150.00 POUNDS PER SQUARE INCH LBS
hardness_rating60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
inside_diameter0.562 INCHES NOMINAL IN
mounting_methodINLET CONNECTION
NSN5330-00-168-6160
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 309-10 MFR: Beko ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
M3059-6E1Interchangeable
interchangeable cross-reference
interchangeable
309-10Interchangeable
interchangeable cross-reference
interchangeable
309-0641-16Interchangeable
interchangeable cross-reference
interchangeable
4000-6Interchangeable
interchangeable cross-reference
interchangeable
309A10Interchangeable
interchangeable cross-reference
interchangeable
302585Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 309-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 309-10?
309-10 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Beko. It is classified as a MRO (MRO_GENERAL).
What parts can replace 309-10?
There are 10 known substitutes for 309-10: M3059-6E1, 309-10, 309-0641-16 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 309-10?
309-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-168-6160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 309-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026