PartsTable
Technical Data Sheet
Download PDF

687-7092-001 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

687-7092-001: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 NUT, nut_style: CLINCH, nut_height: 0.230 INCHES MINIMUM AND 0.272 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF, pilot_length: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-088-4237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
687-7092-001
NSN: 5310-00-088-4237
FSC: 5310 — Nuts and Washers
CAGE: 13499 — ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 NUT
nut_styleCLINCH
nut_height0.230 INCHES MINIMUM AND 0.272 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
pilot_length0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.220 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL EXCEPT INSERT
width_across_flats0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
NSN5310-00-088-4237
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 687-7092-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
PILOT DIAMETER: 0.220 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
PILOT DIAMETER0.220 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
PILOT LENGTH0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.230 INCHES MINIMUM AND 0.272 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL EXCEPT INSERT
SUBSTITUTES & CROSS-REFERENCES 5
200AS104-6B063NCSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1537354PC1Reference document
Same NSN cross-reference
Reference document — Secondary reference
22NC1-62Reference document
Same NSN cross-reference
Reference document — Secondary reference
333-0841-000Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1537354-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 687-7092-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 687-7092-001?
687-7092-001 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 687-7092-001?
There are 5 known substitutes for 687-7092-001: 200AS104-6B063NC, 1537354PC1, 22NC1-62 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 687-7092-001?
687-7092-001 is cataloged in the U.S. Government catalog under NSN 5310-00-088-4237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 687-7092-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.