333-0841-000 — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

333-0841-000: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL NUT, nut_height: 0.251 INCHES NOMINAL IN, pilot_length: 0.063 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.222 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-088-4237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

333-0841-000

NSN: 5310-00-088-4237
NIINs: 000884237, 002084153
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	STEEL NUT
nut_height	0.251 INCHES NOMINAL IN
pilot_length	0.063 INCHES NOMINAL IN
thread_class	3B
thread_series	UNIFIED NATIONAL COARSE (UNC)
pilot_diameter	0.222 INCHES NOMINAL IN
locking_feature	PREVAILING TORQUE WITH NONMETALLIC INSERT
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM NUT
nominal_thread_size	0.138 INCHES IN
thread_quantity_per_inch	32
NSN	5310-00-088-4237

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN

•

THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)

•

TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.138 INCHES IN

•

PILOT DIAMETER: 0.220 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN

•

PILOT LENGTH: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN

•

LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
THREAD SERIES	UNIFIED NATIONAL COARSE (UNC)
TEMP RATING	250.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.138 INCHES IN
PILOT DIAMETER	0.220 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
PILOT LENGTH	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
LOCKING FEATURE	PREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT	0.230 INCHES MINIMUM AND 0.272 INCHES MAXIMUM IN
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL EXCEPT INSERT

SUBSTITUTES & CROSS-REFERENCES 5

687-7092-001Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

200AS104-6B063NCSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

1537354PC1Reference document

Same NSN cross-reference

Reference document — Secondary reference

22NC1-62Reference document

Same NSN cross-reference

Reference document — Secondary reference

1537354-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 333-0841-000?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 333-0841-000?

333-0841-000 is a NUT,SELF-LOCKING,SPLINE.

What parts can replace 333-0841-000?

There are 5 known substitutes for 333-0841-000: 687-7092-001, 200AS104-6B063NC, 1537354PC1 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 333-0841-000?

333-0841-000 is cataloged in the U.S. Government catalog under NSN 5310-00-088-4237. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

333-0841-000 — NUT,SELF-LOCKING,SPLINE

Request a Quote — 333-0841-000