PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6843332-02
6843332-02 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN, center_hole_diameter: 0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-137-7522, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6843332-02
NSN: 5330-00-137-7522
FSC: 5330
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
center_hole_diameter0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
NSN5330-00-137-7522
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6843332-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
3-902 V0747Interchangeable
interchangeable cross-reference
interchangeable
SAE-AMS7276Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-902Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6843332-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6843332-02?
6843332-02 is a PACKING,PREFORMED.
What parts can replace 6843332-02?
There are 3 known substitutes for 6843332-02: 3-902 V0747, SAE-AMS7276, M83248/1-902. Substitute compatibility should be verified for your specific system.
What is the NSN for 6843332-02?
6843332-02 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-137-7522. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6843332-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026