The Shaft and Gear Assembly, cataloged under National Stock Number 6740-01-087-7146, is classified within Federal Supply Class 6740 (Photographic Developing and Finishing Equipment) of the Photographic Equipment group. The manufacturer of record is Eastman Kodak Co. Government technical data includes 2 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 6740-01-087-7146 |
| Primary Part Number | 693326 |
| Item Name | Shaft and Gear Assembly |
| FSC / FSG | 6740 / 67 — Photographic Developing and Finishing Equipment |
| Manufacturer | Eastman Kodak Co |
| Status | ACTIVE |
| FSC Application Data | PHOTOGRAPHIC DEVELOPING AND FINISHING EQUIPMENT |
| General Characteristics Item Description | SHAFT-EK 135 B STAINLESS STEEL,3.500 IN. LG; 1ST END 0.248 IN. DIA 0.375 IN. LG,96 DP DIAMOND KNURL 0.262 IN. DIA 0.250 IN. W,CIRCULAR GROVE 0.248 IN. DIA 0.062 IN. W; MAJOR COMPLIMENT 0.373 IN. DIA 2.188 IN. LG,2ND END 0.248 IN. DIA 0.625 IN. LG W/ CIRCULAR GROVE 0.215 IN. DIA 0.025 IN. W 0.281 IN. FROM MAJOR COMPLIMENT,ALL SURFACES PASSIVATED,GROUND TO 24 MICROINCHES; GEAR-PLASTIC,0.830 IN. DIA,0.375 IN. W,15 AMERICAN STANDARDSTUB TEETH,DIAMETRAL PITCH-20,20 DEG PRESSURE ANGLE,0.7500 IN. STANDARD PITCH DIA,0.7500 IN. OPERATING DIA,0.250 IN. DIA CENTER HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 693326 PRIMARY | Eastman Kodak Co (USA) |
| Reference | Meaning |
|---|---|
| 879284 | 5/9 Secondary reference Eastman Kodak Co |
| 578648 | 5/9 Secondary reference Eastman Kodak Co |
NSN 6740-01-087-7146 is a Shaft and Gear Assembly, manufactured by Eastman Kodak Co, classified under FSC 6740, Photographic Developing and Finishing Equipment. Status: active.
NSN 6740-01-087-7146 has 1 manufacturer part number on file: 693326 (Eastman Kodak Co).
Key specifications for 693326: FSC Application Data: PHOTOGRAPHIC DEVELOPING AND FINISHING EQUIPMENT; General Characteristics Item Description: SHAFT-EK 135 B STAINLESS STEEL,3.500 IN. LG; 1ST END 0.248 IN. DIA 0.375 IN. LG,96 DP DIAMOND KNURL 0.262 IN. DIA 0.250 IN. W,CIRCULAR GROVE 0.248 IN. DIA 0.062 IN. W; MAJOR COMPLIMENT 0.373 IN. DIA 2.188 IN. LG,2ND END 0.248 IN. DIA 0.625 IN. LG W/ CIRCULAR GROVE 0.215 IN. DIA 0.025 IN. W 0.281 IN. FROM MAJOR COMPLIMENT,ALL SURFACES PASSIVATED,GROUND TO 24 MICROINCHES; GEAR-PLASTIC,0.830 IN. DIA,0.375 IN. W,15 AMERICAN STANDARDSTUB TEETH,DIAMETRAL PITCH-20,20 DEG PRESSURE ANGLE,0.7500 IN. STANDARD PITCH DIA,0.7500 IN. OPERATING DIA,0.250 IN. DIA CENTER HOLE IN; End Item Identification: RECORDAK PROSTAR FILM PROCESSOR. 2 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.