PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 65C35445-1
65C35445-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 1.2500 INCHES NOMINAL IN, outer_ring_width: 1.0490 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2810, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65C35445-1
NSN: 3110-00-227-2810
FSC: 3110
CAGE: 98750 — SAN ANTONIO AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width1.2500 INCHES NOMINAL IN
outer_ring_width1.0490 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter2.2500 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2810
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 65C35445-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
INNER RING WIDTH: 1.2500 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
OUTER RING WIDTH: 1.0490 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
INNER RING WIDTH1.2500 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
RETAINER FABRICATION METHODPRESSED
OUTER RING WIDTH1.0490 INCHES NOMINAL IN
MATERIALSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
OVERALL OUTSIDE DIAMETER2.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
AS24461Interchangeable
interchangeable cross-reference
interchangeable
505-20Interchangeable
interchangeable cross-reference
interchangeable
MS24461-20Interchangeable
interchangeable cross-reference
interchangeable
3NBC511ZPInterchangeable
interchangeable cross-reference
interchangeable
505-3Interchangeable
interchangeable cross-reference
interchangeable
MS24461-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65C35445-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65C35445-1?
65C35445-1 is a BEARING,ROLLER,NEEDLE.
What parts can replace 65C35445-1?
There are 35 known substitutes for 65C35445-1: AS24461, 505-20, MS24461-20 and 32 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 65C35445-1?
65C35445-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65C35445-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026