PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6411G
6411G ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOOP,STRAP FASTENER is a the manufacturer industrial component. Key specifications include material: STEEL, inside_height: 0.312 INCHES NOMINAL IN, inside_length: 2.000 INCHES NOMINAL IN, painted_feature: NOT INCLUDED, style_designator: FOOTMANS LOOP, end_item_identification: NSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-130-7909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6411G
NSN: 5340-01-130-7909
FSC: 5340
CAGE: 19220 — EASTERN CO DIV EBERHARD MANUFACTURING (USA)
SPECIFICATIONS
materialSTEEL
inside_height0.312 INCHES NOMINAL IN
inside_length2.000 INCHES NOMINAL IN
painted_featureNOT INCLUDED
style_designatorFOOTMANS LOOP
end_item_identificationNSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)
center_to_center_distance_between_holes3.125 INCHES NOMINAL IN
NSN5340-01-130-7909
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6411G MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
INSIDE LENGTH: 2.000 INCHES NOMINAL IN
•
INSIDE HEIGHT: 0.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FOOTMANS LOOP
•
PAINTED FEATURE: NOT INCLUDED
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 3.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
INSIDE LENGTH2.000 INCHES NOMINAL IN
INSIDE HEIGHT0.312 INCHES NOMINAL IN
END ITEM IDENTIFICATIONNSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)
STYLE DESIGNATORFOOTMANS LOOP
PAINTED FEATURENOT INCLUDED
CENTER TO CENTER DISTANCE BETWEEN HOLES3.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
800216Upgraded Successor
successor cross-reference
successor
6411DInterchangeable
interchangeable cross-reference
interchangeable
GL514A1Interchangeable
interchangeable cross-reference
interchangeable
1165-1 1-4Interchangeable
interchangeable cross-reference
interchangeable
E-260-3-310-1Interchangeable
interchangeable cross-reference
interchangeable
20-2001-6-2-SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6411G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6411G?
6411G is a LOOP,STRAP FASTENER.
What parts can replace 6411G?
There are 10 known substitutes for 6411G: 800216, 6411D, GL514A1 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6411G?
6411G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-130-7909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6411G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026