PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6411D
6411D ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOOP,STRAP FASTENER is a the manufacturer industrial component. Key specifications include material: STEEL, hole_diameter: 0.219 INCHES NOMINAL IN, inside_height: 0.250 INCHES NOMINAL IN, inside_length: 1.375 INCHES NOMINAL IN, painted_feature: NOT INCLUDED, style_designator: FOOTMANS LOOP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-329-2428, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6411D
NSN: 5340-00-329-2428
FSC: 5340
CAGE: 72804 — EASTERN CO THE (USA)
SPECIFICATIONS
materialSTEEL
hole_diameter0.219 INCHES NOMINAL IN
inside_height0.250 INCHES NOMINAL IN
inside_length1.375 INCHES NOMINAL IN
painted_featureNOT INCLUDED
style_designatorFOOTMANS LOOP
center_to_center_distance_between_holes2.250 INCHES NOMINAL IN
NSN5340-00-329-2428
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6411D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FOOTMANS LOOP
•
INSIDE HEIGHT: 0.250 INCHES NOMINAL IN
•
PAINTED FEATURE: NOT INCLUDED
•
MATERIAL: STEEL
•
HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
INSIDE LENGTH: 1.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 2.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONW/S: FMS-AIRCRAFT, HAWKEYE E-2C; AIRCRAFT, HERCULES C-130; AIRCRAFT, TOMCAT F-14; AIRCRAFT, HAWKEYE E-2C; NSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK); 4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV)
STYLE DESIGNATORFOOTMANS LOOP
INSIDE HEIGHT0.250 INCHES NOMINAL IN
PAINTED FEATURENOT INCLUDED
MATERIALSTEEL
HOLE DIAMETER0.219 INCHES NOMINAL IN
INSIDE LENGTH1.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES2.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
800216Upgraded Successor
successor cross-reference
successor
E-260-3-310-1Interchangeable
interchangeable cross-reference
interchangeable
20-2001-6-2-SInterchangeable
interchangeable cross-reference
interchangeable
200-1401-31-01-02Interchangeable
interchangeable cross-reference
interchangeable
6411GInterchangeable
interchangeable cross-reference
interchangeable
111005801Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6411D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6411D?
6411D is a LOOP,STRAP FASTENER.
What parts can replace 6411D?
There are 10 known substitutes for 6411D: 800216, E-260-3-310-1, 20-2001-6-2-S and 7 more. Substitute compatibility should be verified for your specific system.
Is 6411D still available?
6411D is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6411D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026