6405267-ASSY60A — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

6405267-ASSY60A: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES FIRST END, thread_class: 3A FIRST END A, connection_type: THREADED EXTERNAL TUBE FIRST END, inside_diameter: 0.367 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN, connection_style: PLAIN FIRST END, outside_diameter: 0.812 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-451-8968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

6405267-ASSY60A

NSN: 4720-01-451-8968
FSC: 4720 — Hose and Flexible Tubing
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

flow_angle	90.0 DEGREES FIRST END
thread_class	3A FIRST END A
connection_type	THREADED EXTERNAL TUBE FIRST END
inside_diameter	0.367 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
connection_style	PLAIN FIRST END
outside_diameter	0.812 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND FIRST END
operating_pressure	4500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure	18000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size	1.188 INCHES FIRST END IN
end_connection_design	ELBOW FIRST END
end_item_identification	W/S CODE,SEAWOLF CLASS SSN
NSN	4720-01-451-8968

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 90.0 DEGREES FIRST END

•

MEASURING METHOD AND LENGTH: 17.160 INCHES NOMINAL WORKING IN

•

MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN

•

CONNECTION STYLE: PLAIN FIRST END

•

END CONNECTION DESIGN: ELBOW FIRST END

•

LAYER COMPOSITION AND LOCATION: 1ST LAYER SPIRALLY WRAPPED STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC AND OUTER LAYER BRAIDED STEEL WIRE

•

ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG: 0.0

•

CONNECTION TYPE: THREADED EXTERNAL TUBE FIRST END

TECHNICAL CHARACTERISTICS

FLOW ANGLE	90.0 DEGREES FIRST END
MEASURING METHOD AND LENGTH	17.160 INCHES NOMINAL WORKING IN
MINIMUM INSIDE BENDING RADIUS	5.000 INCHES IN
CONNECTION STYLE	PLAIN FIRST END
END CONNECTION DESIGN	ELBOW FIRST END
LAYER COMPOSITION AND LOCATION	1ST LAYER SPIRALLY WRAPPED STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC AND OUTER LAYER BRAIDED STEEL WIRE
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG	0.0
CONNECTION TYPE	THREADED EXTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLE	ROUND
OUTSIDE DIAMETER	0.812 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 3

6405267Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

MIL-H-24135/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-24135/2Reference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 6405267-ASSY60A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 6405267-ASSY60A?

6405267-ASSY60A is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace 6405267-ASSY60A?

There are 3 known substitutes for 6405267-ASSY60A: 6405267, MIL-H-24135/2, MIL-DTL-24135/2. Substitute compatibility should be verified for your specific system.

What is the NSN for 6405267-ASSY60A?

6405267-ASSY60A is cataloged in the U.S. Government catalog under NSN 4720-01-451-8968. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

6405267-ASSY60A — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — 6405267-ASSY60A