PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-H-24135/2
MIL-H-24135/2 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The MIL-H-24135/2 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-541-7189, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-24135/2
NSN: 4720-00-541-7189
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-H-24135/2
NSN4720-00-541-7189
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-24135/2 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 9.500 INCHES IN
•
INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
FEATURES PROVIDED: NONSKIVE
•
OUTSIDE DIAMETER: 1.230 INCHES NOMINAL IN
•
SUPPLEMENTARY FEATURES: THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES; 01276, 006124 AND 98441 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
•
HYDROSTATIC TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-24135 GOVERNMENT SPECIFICATION
•
MATERIAL: RUBBER SYNTHETIC TUBE
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS9.500 INCHES IN
INSIDE DIAMETER0.750 INCHES NOMINAL IN
FEATURES PROVIDEDNONSKIVE
OUTSIDE DIAMETER1.230 INCHES NOMINAL IN
SUPPLEMENTARY FEATURESTHIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES; 01276, 006124 AND 98441 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
HYDROSTATIC TEST PRESSURE6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81349-MIL-H-24135 GOVERNMENT SPECIFICATION
MATERIALRUBBER SYNTHETIC TUBE
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND WATER, SALT SINGLE RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
2-1412Interchangeable
interchangeable cross-reference
interchangeable
02-1412-20Interchangeable
interchangeable cross-reference
interchangeable
FDE474 PAGE 4 ITEM 6Interchangeable
interchangeable cross-reference
interchangeable
AN737TW44-48Interchangeable
interchangeable cross-reference
interchangeable
HK9C24-44/48Interchangeable
interchangeable cross-reference
interchangeable
45D13-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-H-24135/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-24135/2?
MIL-H-24135/2 is a MIL-H-24135/2.
What parts can replace MIL-H-24135/2?
There are 23 known substitutes for MIL-H-24135/2: 2-1412, 02-1412-20, FDE474 PAGE 4 ITEM 6 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-24135/2?
MIL-H-24135/2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-541-7189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-24135/2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026