PartsTable
Technical Data Sheet
Download PDF

640000P84 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

640000P84: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, length: 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-065-2806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
640000P84
NSN: 5340-01-065-2806
FSC: 5340 — Hardware, Commercial
CAGE: 94117 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
width0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
length0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_height0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
loop/holding_dimension0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.127 INCHES MINIMUM IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-065-2806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 640000P84 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.127 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
LENGTH0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.127 INCHES MINIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
100-200-2-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
M24066-4-101Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-C-24066/4Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM24066/4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
6013-12AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 640000P84?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 640000P84?
640000P84 is a CLIP,SPRING TENSION.
What parts can replace 640000P84?
There are 5 known substitutes for 640000P84: 100-200-2-2, M24066-4-101, MIL-C-24066/4 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 640000P84?
640000P84 is cataloged in the U.S. Government catalog under NSN 5340-01-065-2806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 640000P84

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.