PartsTable / COMPONENT / 63X1496
63X1496
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, housing_bore_diameter: 3.350 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-1226, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X1496
NSN: 5330-00-154-1226 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.469 INCHES NOMINAL IN housing_bore_diameter 3.350 INCHES NOMINAL IN sealing_element_style ANGULAR maximum_pressure_rating 7.0 POUNDS PER SQUARE INCH (PSI) LBS accommodated_shaft_diameter 2.250 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-154-1226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X1496
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
• HOUSING BORE DIAMETER: 3.350 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 2.250 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM PRESSURE RATING 7.0 POUNDS PER SQUARE INCH (PSI) LBS HOUSING BORE DIAMETER 3.350 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 2.250 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CASE CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
1496 Interchangeable interchangeable cross-reference
interchangeable
A1205P146 Interchangeable interchangeable cross-reference
interchangeable
361261 Interchangeable interchangeable cross-reference
interchangeable
5330-174000-1 Interchangeable interchangeable cross-reference
interchangeable
60870 Interchangeable interchangeable cross-reference
interchangeable
811-4050258 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X1496?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X1496?
63X1496 is a SEAL,PLAIN ENCASED.
What parts can replace 63X1496?
There are 19 known substitutes for 63X1496: 1496, A1205P146, 361261 and 16 more. Substitute compatibility should be verified for your specific system.
Is 63X1496 still available?
63X1496 is currently cancelled.
Request a Quote — 63X1496