PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 40J604PC5
40J604PC5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, housing_bore_diameter: 3.350 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-1226, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40J604PC5
NSN: 5330-00-154-1226
FSC: 5330
CAGE: 79500 — WESTINGHOUSE ELECTRIC CORP (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
housing_bore_diameter3.350 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter2.250 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-1226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40J604PC5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HOUSING BORE DIAMETER: 3.350 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.250 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HOUSING BORE DIAMETER3.350 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.250 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
1496Interchangeable
interchangeable cross-reference
interchangeable
A1205P146Interchangeable
interchangeable cross-reference
interchangeable
361261Interchangeable
interchangeable cross-reference
interchangeable
5330-174000-1Interchangeable
interchangeable cross-reference
interchangeable
60870Interchangeable
interchangeable cross-reference
interchangeable
811-4050258Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 40J604PC5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40J604PC5?
40J604PC5 is a SEAL,PLAIN ENCASED.
What parts can replace 40J604PC5?
There are 19 known substitutes for 40J604PC5: 1496, A1205P146, 361261 and 16 more. Substitute compatibility should be verified for your specific system.
Is 40J604PC5 still available?
40J604PC5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40J604PC5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026