PartsTable
Technical Data Sheet
Download PDF

6392767-1 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6392767-1: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY, overall_width: 1.048 INCHES NOMINAL IN, overall_length: 3.190 INCHES NOMINAL IN, mounting_hole_type: PLAIN, mounting_hole_diameter: 0.279 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, end_item_identification: BRACKET SWITCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-502-8529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6392767-1
NSN: 5340-01-502-8529
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialTITANIUM ALLOY
overall_width1.048 INCHES NOMINAL IN
overall_length3.190 INCHES NOMINAL IN
mounting_hole_typePLAIN
mounting_hole_diameter0.279 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
end_item_identificationBRACKET SWITCH
material_document_and_classificationASTM B265-1999E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyBRACKET,MOUNTING,SWITCH
NSN5340-01-502-8529
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6392767-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B265-1999E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.279 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
MATERIAL: TITANIUM ALLOY
•
MOUNTING HOLE TYPE: PLAIN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B265-1999E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.279 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
OVERALL LENGTH3.190 INCHES NOMINAL IN
OVERALL WIDTH1.048 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET,MOUNTING,SWITCH
END ITEM IDENTIFICATIONBRACKET SWITCH
MATERIALTITANIUM ALLOY
MOUNTING HOLE TYPEPLAIN
SUBSTITUTES & CROSS-REFERENCES 1
6392767Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6392767-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6392767-1?
6392767-1 is a BRACKET,MOUNTING.
What parts can replace 6392767-1?
There is 1 known substitute for 6392767-1: 6392767. Substitute compatibility should be verified for your specific system.
What is the NSN for 6392767-1?
6392767-1 is cataloged in the U.S. Government catalog under NSN 5340-01-502-8529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6392767-1