PartsTable
Technical Data Sheet
Download PDF

6392767 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6392767: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, style_designator: MORTISE, mounting_facility: COUNTERSUNK HOLE AND UNTHREADED HOLE(S), material_thickness: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-502-8529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6392767
NSN: 5340-01-502-8529
NIINs: 015028529, 015028619, 015028620
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
hole_quantity1
overall_width1.500 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
style_designatorMORTISE
mounting_facilityCOUNTERSUNK HOLE AND UNTHREADED HOLE(S)
material_thickness0.250 INCHES NOMINAL IN
mounting_hole_typePLAIN
mounting_hole_diameter0.278 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
end_item_identificationBRACKET,SWITCH
material_document_and_classificationUNABLE TO DECODE
part_name_assigned_by_controlling_agencySTRIKE PLATE
NSN5340-01-502-8529
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6392767 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B265-1999E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.279 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
MATERIAL: TITANIUM ALLOY
•
MOUNTING HOLE TYPE: PLAIN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B265-1999E1 NATIONAL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.279 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
OVERALL LENGTH3.190 INCHES NOMINAL IN
OVERALL WIDTH1.048 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET,MOUNTING,SWITCH
END ITEM IDENTIFICATIONBRACKET SWITCH
MATERIALTITANIUM ALLOY
MOUNTING HOLE TYPEPLAIN
SUBSTITUTES & CROSS-REFERENCES 1
6392767-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6392767?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6392767?
6392767 is a STRIKE,CATCH.
What parts can replace 6392767?
There is 1 known substitute for 6392767: 6392767-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 6392767?
6392767 is cataloged in the U.S. Government catalog under NSN 5340-01-502-8529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6392767