PartsTable
Technical Data Sheet
Download PDF

62AX83 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

62AX83: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.8820 INCHES NOMINAL IN, bore_diameter: 1.6250 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0312 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0203, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62AX83
NSN: 3110-00-100-0203
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 76084 — MACK TRUCKS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.8820 INCHES NOMINAL IN
bore_diameter1.6250 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0312 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0203
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 62AX83 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
CONE WIDTH: 0.8820 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
CONE WIDTH0.8820 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
K336Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
211093Reference document
Same NSN cross-reference
Reference document — Secondary reference
100267Reference document
Same NSN cross-reference
Reference document — Secondary reference
2RB62Reference document
Same NSN cross-reference
Reference document — Secondary reference
511443Reference document
Same NSN cross-reference
Reference document — Secondary reference
336Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 62AX83?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62AX83?
62AX83 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 62AX83?
There are 9 known substitutes for 62AX83: K336, 211093, 100267 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62AX83?
62AX83 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0203. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62AX83

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.