PartsTable
Technical Data Sheet
PartsTable / MRO / 211093
211093 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.8820 INCHES NOMINAL IN, body_height: 0.364 INCHES NOMINAL IN, body_diameter: 0.572 INCHES MAXIMUM IN, bore_diameter: 1.6250 INCHES NOMINAL IN, terminal_type: WIRE LEAD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0203, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 211093
NSN: 3110-00-100-0203
FSC: 3110
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.8820 INCHES NOMINAL IN
body_height0.364 INCHES NOMINAL IN
body_diameter0.572 INCHES MAXIMUM IN
bore_diameter1.6250 INCHES NOMINAL IN
terminal_typeWIRE LEAD
overall_height0.500 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
style_designatorNORMAL ANGLE
features_providedHERMETICALLY SEALED CASE
cone_corner_radius0.0312 INCHES NOMINAL IN
contact_adjustabilityDEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE
NSN3110-00-100-0203
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 211093 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.8820 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
BORE DIAMETER1.6250 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.8820 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
7264785Interchangeable
interchangeable cross-reference
interchangeable
A67159Interchangeable
interchangeable cross-reference
interchangeable
59687Interchangeable
interchangeable cross-reference
interchangeable
CS4310-0033Interchangeable
interchangeable cross-reference
interchangeable
ASC1529717Interchangeable
interchangeable cross-reference
interchangeable
156 ITEM 36Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211093?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211093?
211093 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 211093?
There are 25 known substitutes for 211093: 7264785, A67159, 59687 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 211093?
211093 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0203. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211093

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026