PartsTable
Technical Data Sheet
Download PDF

6208525 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6208525: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.212 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN, length: 1.244 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN, overall_height: 1.119 INCHES NOMINAL IN, special_features: 0;750 IN. RADIUS ON W IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-361-8284, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6208525
NSN: 5340-00-361-8284
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.212 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
length1.244 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
overall_height1.119 INCHES NOMINAL IN
special_features0;750 IN. RADIUS ON W IN
material_thickness0.020 INCHES NOMINAL IN
NSN5340-00-361-8284
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6208525 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.244 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
WIDTH: 0.212 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.119 INCHES NOMINAL IN
LENGTH1.244 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SPECIAL FEATURES0;750 IN. RADIUS ON W IN
WIDTH0.212 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
2-440Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6208525?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6208525?
6208525 is a CLIP,SPRING TENSION.
What parts can replace 6208525?
There is 1 known substitute for 6208525: 2-440. Substitute compatibility should be verified for your specific system.
What is the NSN for 6208525?
6208525 is cataloged in the U.S. Government catalog under NSN 5340-00-361-8284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6208525