PartsTable
Technical Data Sheet
Download PDF

611913 — REDUCER,TUBE

✓ Government record, cited
Hypertec · NUT WASHER
PRODUCT OVERVIEW

611913: REDUCER,TUBE.

The REDUCER,TUBE is a Hypertec industrial component. Key specifications include material: STEEL OVERALL, seat_angle: 37.0 DEGREES ALL ENDS, reducer_type: CONCENTRIC, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARED (TUBE) ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-394-7251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
611913
NSN: 5310-00-394-7251
NIINs: 003947251, 013636788
FSC: 5310 — Nuts and Washers
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
seat_angle37.0 DEGREES ALL ENDS
reducer_typeCONCENTRIC
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARED (TUBE) ALL ENDS
surface_treatmentCADMIUM OVERALL
nominal_thread_size1.875 INCHES SECOND END IN
nominal_overall_length6.000 INCHES IN
thread_quantity_per_inch12 ALL ENDS
thread_series_designatorUNIFIED NATIONAL JOINT (UNJ) ALL ENDS
nominal_outside_diameter_tube_accommodated2.500 INCHES FIRST END IN
NSN5310-00-394-7251
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 611913 · Hypertec ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE FINISH: 63.0 MICROINCHES
•
NUT COUNTERBORE DEPTH: 0.312 INCHES NOMINAL NUT IN
•
THREAD DIRECTION: RIGHT-HAND
•
COUNTERBORE DIAMETER: 0.562 INCHES MINIMUM AND 0.565 INCHES MAXIMUM NUT IN
•
NUT HEIGHT: 0.250 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
•
BEARING SURFACE TYPE: WASHER FACED
TECHNICAL CHARACTERISTICS
BEARING SURFACE FINISH63.0 MICROINCHES
NUT COUNTERBORE DEPTH0.312 INCHES NOMINAL NUT IN
THREAD DIRECTIONRIGHT-HAND
COUNTERBORE DIAMETER0.562 INCHES MINIMUM AND 0.565 INCHES MAXIMUM NUT IN
NUT HEIGHT0.250 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
BEARING SURFACE TYPEWASHER FACED
SUBSTITUTES & CROSS-REFERENCES 2
11913P9Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
13139PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 611913?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 611913?
611913 is a REDUCER,TUBE manufactured by Hypertec.
What parts can replace 611913?
There are 2 known substitutes for 611913: 11913P9, 13139PC6. Substitute compatibility should be verified for your specific system.
What is the NSN for 611913?
611913 is cataloged in the U.S. Government catalog under NSN 5310-00-394-7251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 611913