PartsTable
Technical Data Sheet
Download PDF

11913P9 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11913P9: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include nut_style: HEXAGON, nut_height: 0.250 INCHES NOMINAL IN, thread_class: 2B, thread_direction: RIGHT-HAND, bearing_surface_type: WASHER FACED, counterbore_diameter: 0.562 INCHES MINIMUM AND 0.565 INCHES MAXIMUM NUT IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-394-7251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11913P9
NSN: 5310-00-394-7251
FSC: 5310 — Nuts and Washers
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
nut_styleHEXAGON
nut_height0.250 INCHES NOMINAL IN
thread_class2B
thread_directionRIGHT-HAND
bearing_surface_typeWASHER FACED
counterbore_diameter0.562 INCHES MINIMUM AND 0.565 INCHES MAXIMUM NUT IN
nut_counterbore_depth0.312 INCHES NOMINAL NUT IN
bearing_surface_finish63.0 MICROINCHES
NSN5310-00-394-7251
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11913P9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE FINISH: 63.0 MICROINCHES
•
NUT COUNTERBORE DEPTH: 0.312 INCHES NOMINAL NUT IN
•
THREAD DIRECTION: RIGHT-HAND
•
COUNTERBORE DIAMETER: 0.562 INCHES MINIMUM AND 0.565 INCHES MAXIMUM NUT IN
•
NUT HEIGHT: 0.250 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
•
BEARING SURFACE TYPE: WASHER FACED
TECHNICAL CHARACTERISTICS
BEARING SURFACE FINISH63.0 MICROINCHES
NUT COUNTERBORE DEPTH0.312 INCHES NOMINAL NUT IN
THREAD DIRECTIONRIGHT-HAND
COUNTERBORE DIAMETER0.562 INCHES MINIMUM AND 0.565 INCHES MAXIMUM NUT IN
NUT HEIGHT0.250 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
BEARING SURFACE TYPEWASHER FACED
SUBSTITUTES & CROSS-REFERENCES 2
611913Reference document
Same NSN cross-reference
Reference document — Secondary reference
13139PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11913P9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11913P9?
11913P9 is a NUT,PLAIN,HEXAGON.
What parts can replace 11913P9?
There are 2 known substitutes for 11913P9: 611913, 13139PC6. Substitute compatibility should be verified for your specific system.
What is the NSN for 11913P9?
11913P9 is cataloged in the U.S. Government catalog under NSN 5310-00-394-7251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11913P9