PartsTable
Technical Data Sheet
PartsTable / MRO / 61-225
61-225 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>Highlights</b><br>-elegant aluminium frame.<br>-including prepunched passepartouts.<br>-round ground, quality washed glass.<br>-precision mitring.<br>-including heavy load mount with mounting template.<br>-matt-eloxy aluminium profile for stylish living. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-199-7838, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 61-225
NSN: 5330-00-199-7838
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
body_styleRIGHT ANGLE, CARD
body_width0.330 INCHES NOMINAL IN
case_styleSQUARE
seal_width0.562 INCHES NOMINAL IN
body_height0.240 INCHES NOMINAL IN
body_length1.565 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.625 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
NSN5330-00-199-7838
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 61-225 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.562 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 5.250 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 4.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.562 INCHES NOMINAL IN
HOUSING BORE DIAMETER5.250 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER4.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
61-2-25Interchangeable
interchangeable cross-reference
interchangeable
202-5001Interchangeable
interchangeable cross-reference
interchangeable
NL5439-374-0Interchangeable
interchangeable cross-reference
interchangeable
5010-1500Interchangeable
interchangeable cross-reference
interchangeable
65000-036Interchangeable
interchangeable cross-reference
interchangeable
00044TY1CASETY2BELEMENTInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 61-225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61-225?
61-225 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 61-225?
There are 7 known substitutes for 61-225: 61-2-25, 202-5001, NL5439-374-0 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 61-225?
61-225 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-199-7838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61-225

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026