PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00044TY1CASETY2BELEMENT
00044TY1CASETY2BELEMENT ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include color: BLACK, material: STEEL CASE, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-113-1497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00044TY1CASETY2BELEMENT
NSN: 5330-00-113-1497
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
colorBLACK
materialSTEEL CASE
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
surface_treatmentZINC CASE
housing_bore_diameter3.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter2.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-113-1497
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00044TY1CASETY2BELEMENT MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 0.999 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER0.999 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER0.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SPECIAL FEATURESCRES SPRING
SEAL WIDTH0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALCOPPER ALLOY CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
167840Interchangeable
interchangeable cross-reference
interchangeable
520078Interchangeable
interchangeable cross-reference
interchangeable
54162-5Interchangeable
interchangeable cross-reference
interchangeable
R9W600-172Interchangeable
interchangeable cross-reference
interchangeable
70-1241Interchangeable
interchangeable cross-reference
interchangeable
10865529Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00044TY1CASETY2BELEMENT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00044TY1CASETY2BELEMENT?
00044TY1CASETY2BELEMENT is a SEAL,PLAIN ENCASED.
What parts can replace 00044TY1CASETY2BELEMENT?
There are 10 known substitutes for 00044TY1CASETY2BELEMENT: 167840, 520078, 54162-5 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00044TY1CASETY2BELEMENT?
00044TY1CASETY2BELEMENT is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-113-1497. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00044TY1CASETY2BELEMENT

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026