PartsTable
Technical Data Sheet
Download PDF

6041B14 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6041B14: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OVERALL, nut_style: SLEEVE, nut_length: 0.250 INCHES NOMINAL IN, nut_diameter: 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNEF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-291-8775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6041B14
NSN: 5310-00-291-8775
FSC: 5310 — Nuts and Washers
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OVERALL
nut_styleSLEEVE
nut_length0.250 INCHES NOMINAL IN
nut_diameter0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNEF
flange_thickness0.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.750 INCHES IN
cross-sectional_shapeROUND NUT
thread_quantity_per_inch20
flange_width_across_flats1.380 INCHES NOMINAL IN
NSN5310-00-291-8775
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6041B14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 1.380 INCHES NOMINAL IN
•
NUT LENGTH: 0.250 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.125 INCHES NOMINAL IN
•
THREAD SERIES: UNEF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT DIAMETER: 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS1.380 INCHES NOMINAL IN
NUT LENGTH0.250 INCHES NOMINAL IN
FLANGE THICKNESS0.125 INCHES NOMINAL IN
THREAD SERIESUNEF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT DIAMETER0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
CROSS-SECTIONAL SHAPEROUND NUT
SUBSTITUTES & CROSS-REFERENCES 1
6041-14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 6041B14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6041B14?
6041B14 is a NUT,SLEEVE.
What parts can replace 6041B14?
There is 1 known substitute for 6041B14: 6041-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 6041B14?
6041B14 is cataloged in the U.S. Government catalog under NSN 5310-00-291-8775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6041B14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.