PartsTable
Technical Data Sheet
Download PDF

6041-14 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6041-14: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, nut_style: SLEEVE, body_style: HOOD, TOP OPENING W/CLAMP, nut_length: 0.250 INCHES NOMINAL IN, shell_type: HOOD, TOP OPENING, nut_diameter: 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-291-8775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6041-14
NSN: 5310-00-291-8775
NIINs: 002918775, 007223587, 013818234
FSC: 5310 — Nuts and Washers
CAGE: 13002 — GOODRICH CORPORATION DIV ADVANCED STRUCTURES LANDING SYSTEMS (USA)
SPECIFICATIONS
materialCOPPER OVERALL
nut_styleSLEEVE
body_styleHOOD, TOP OPENING W/CLAMP
nut_length0.250 INCHES NOMINAL IN
shell_typeHOOD, TOP OPENING
nut_diameter0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_class2A A
overall_width0.600 INCHES NOMINAL IN
terminal_typeSOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
thread_seriesUNEF
overall_height1.935 INCHES NOMINAL IN
overall_length1.685 INCHES MAXIMUM IN
NSN5310-00-291-8775
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6041-14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 1.380 INCHES NOMINAL IN
•
NUT LENGTH: 0.250 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.125 INCHES NOMINAL IN
•
THREAD SERIES: UNEF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT DIAMETER: 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS1.380 INCHES NOMINAL IN
NUT LENGTH0.250 INCHES NOMINAL IN
FLANGE THICKNESS0.125 INCHES NOMINAL IN
THREAD SERIESUNEF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT DIAMETER0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
CROSS-SECTIONAL SHAPEROUND NUT
SUBSTITUTES & CROSS-REFERENCES 1
6041B14Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 6041-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6041-14?
6041-14 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 6041-14?
There is 1 known substitute for 6041-14: 6041B14. Substitute compatibility should be verified for your specific system.
What is the NSN for 6041-14?
6041-14 is cataloged in the U.S. Government catalog under NSN 5310-00-291-8775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6041-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.