PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6018-99CC
6018-99CC ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 2.000 INCHES NOMINAL IN, length: 0.810 INCHES NOMINAL IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.144 INCHES NOMINAL IN, overall_height: 0.920 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-072-3570, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6018-99CC
NSN: 5340-00-072-3570
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
length0.810 INCHES NOMINAL IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.144 INCHES NOMINAL IN
overall_height0.920 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.029 INCHES NOMINAL IN
loop/holding_dimension0.750 INCHES NOMINAL IN
distance_from_loop_center_to_end0.520 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-072-3570
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6018-99CC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 0.750 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.520 INCHES NOMINAL IN
•
WIDTH: 2.000 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.144 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 172 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.920 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.750 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.520 INCHES NOMINAL IN
WIDTH2.000 INCHES NOMINAL IN
HOLE DIAMETER0.144 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 172 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.029 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066Upgraded Successor
successor cross-reference
successor
M24066/2-214Upgraded Successor
successor cross-reference
successor
NASM24066/2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6018-99CC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6018-99CC?
6018-99CC is a CLIP,SPRING TENSION.
What parts can replace 6018-99CC?
There are 11 known substitutes for 6018-99CC: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6018-99CC?
6018-99CC is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-072-3570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6018-99CC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026