PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6013-14CC-012
6013-14CC-012 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, length: 0.220 INCHES NOMINAL IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.073 INCHES NOMINAL IN, overall_height: 0.270 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-177-4073, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6013-14CC-012
NSN: 5340-00-177-4073
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
length0.220 INCHES NOMINAL IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.073 INCHES NOMINAL IN
overall_height0.270 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.195 INCHES NOMINAL IN
distance_from_loop_center_to_end0.132 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-177-4073
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6013-14CC-012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
LENGTH: 0.220 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
LOOP/HOLDING DIMENSION: 0.195 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.073 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
LENGTH0.220 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
LOOP/HOLDING DIMENSION0.195 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
HOLE DIAMETER0.073 INCHES NOMINAL IN
WIDTH0.250 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.132 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6013-14CC-012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6013-14CC-012?
6013-14CC-012 is a CLIP,SPRING TENSION.
What parts can replace 6013-14CC-012?
There are 19 known substitutes for 6013-14CC-012: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 16 more. Substitute compatibility should be verified for your specific system.
Is 6013-14CC-012 still available?
6013-14CC-012 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6013-14CC-012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026