PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6012-104A
6012-104A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN, length: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-069-2804, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6012-104A
NSN: 5340-00-069-2804
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
length0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
materialSTEEL OVERALL
hole_diameter0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.019 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
loop/holding_dimension0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.356 INCHES MINIMUM IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-069-2804
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6012-104A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.019 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
LOOP/HOLDING DIMENSION: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.356 INCHES MINIMUM IN
•
WIDTH: 0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
MATERIAL THICKNESS0.019 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
LOOP/HOLDING DIMENSION0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.356 INCHES MINIMUM IN
WIDTH0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6012-104A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6012-104A?
6012-104A is a CLIP,SPRING TENSION.
What parts can replace 6012-104A?
There are 22 known substitutes for 6012-104A: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 19 more. Substitute compatibility should be verified for your specific system.
Is 6012-104A still available?
6012-104A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6012-104A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026