PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 601180
601180 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, material_thickness: 0.051 INCHES NOMINAL IN, loop_inside_diameter: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-119-1756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601180
NSN: 5340-00-119-1756
FSC: 5340
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
diameter0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationAMS 4041/ TEMPER T3 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.996 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.783 INCHES NOMINAL IN
NSN5340-00-119-1756
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 601180 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.996 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.783 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
DIAMETER0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.996 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.783 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4041/ TEMPER T3 ASSN STD SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
MS9352-09Upgraded Successor
successor cross-reference
successor
NAS1715CT32SWHUpgraded Successor
successor cross-reference
successor
NAS1715Upgraded Successor
successor cross-reference
successor
5340PL0811595Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 601180?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601180?
601180 is a CLAMP,LOOP.
What parts can replace 601180?
There are 4 known substitutes for 601180: MS9352-09, NAS1715CT32SWH, NAS1715 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 601180?
601180 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-119-1756. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601180

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026