PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 601000-10D0360
601000-10D0360 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.562 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-224-8711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
601000-10D0360
NSN: 4720-01-224-8711
FSC: 4720
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.562 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.797 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure5000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.875 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-224-8711
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 601000-10D0360 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
INSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
TEMP RATING: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
OUTSIDE DIAMETER: 0.797 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
INSIDE DIAMETER0.562 INCHES NOMINAL IN
END CONNECTION DESIGNSTRAIGHT FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
TEMP RATING-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
OUTSIDE DIAMETER0.797 INCHES NOMINAL IN
BURST TEST PRESSURE5000.0 POUNDS PER SQUARE INCH LBS
CONNECTION STYLESWIVEL NUT FLARE FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
105393Interchangeable
interchangeable cross-reference
interchangeable
M105393Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83796/1Interchangeable
interchangeable cross-reference
interchangeable
M83796/1N0204AInterchangeable
interchangeable cross-reference
interchangeable
AE1000881N0204Interchangeable
interchangeable cross-reference
interchangeable
S850D0220DInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 601000-10D0360?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 601000-10D0360?
601000-10D0360 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 601000-10D0360?
There are 24 known substitutes for 601000-10D0360: 105393, M105393, MIL-DTL-83796/1 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 601000-10D0360?
601000-10D0360 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-224-8711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 601000-10D0360

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026