PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6009-227CC
6009-227CC ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, length: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, overall_height: 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-144-6722, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6009-227CC
NSN: 5340-00-144-6722
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
length0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
overall_height0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
loop/holding_dimension0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.196 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-144-6722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6009-227CC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
LENGTH: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.196 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
WIDTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
LENGTH0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.196 INCHES NOMINAL IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
LOOP/HOLDING DIMENSION0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6009-227CC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6009-227CC?
6009-227CC is a CLIP,SPRING TENSION.
What parts can replace 6009-227CC?
There are 20 known substitutes for 6009-227CC: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 17 more. Substitute compatibility should be verified for your specific system.
Is 6009-227CC still available?
6009-227CC is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6009-227CC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026