PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6008-1A
6008-1A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include head_style: BINDING, head_height: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN, thread_length: 0.250 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-063-5983, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6008-1A
NSN: 5340-00-063-5983
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
head_styleBINDING
head_height0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
thread_length0.250 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentNICKEL
thread_quantity_per_inch40
NSN5340-00-063-5983
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6008-1A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.160 INCHES MINIMUM IN
•
LOOP/HOLDING DIMENSION: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.093 INCHES NOMINAL IN
WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.160 INCHES MINIMUM IN
LOOP/HOLDING DIMENSION0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
LENGTH0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6008-1A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6008-1A?
6008-1A is a CLIP,SPRING TENSION.
What parts can replace 6008-1A?
There are 19 known substitutes for 6008-1A: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 16 more. Substitute compatibility should be verified for your specific system.
Is 6008-1A still available?
6008-1A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6008-1A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026