PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6002-107CC
6002-107CC ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, overall_height: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-556-7078, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6002-107CC
NSN: 5340-00-556-7078
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
overall_height0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
material_thickness0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
loop/holding_dimension0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.250 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-556-7078
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6002-107CC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
DISTANCE FROM LOOP CENTER TO END: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
•
WIDTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
DISTANCE FROM LOOP CENTER TO END0.250 INCHES NOMINAL IN
LENGTH0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
WIDTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIAL THICKNESS0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL HEIGHT0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066Upgraded Successor
successor cross-reference
successor
M24066/2-214Upgraded Successor
successor cross-reference
successor
NASM24066/2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6002-107CC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6002-107CC?
6002-107CC is a CLIP,SPRING TENSION.
What parts can replace 6002-107CC?
There are 21 known substitutes for 6002-107CC: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 18 more. Substitute compatibility should be verified for your specific system.
Is 6002-107CC still available?
6002-107CC is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6002-107CC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026