PartsTable
Technical Data Sheet
PartsTable / O-RING / 60-P-31-144
60-P-31-144 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN, center_hole_diameter: 2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-3083, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-P-31-144
NSN: 5331-00-291-3083
FSC: 5331 — O-RING
CAGE: 28486 — WEST AMERICAN RUBBER CO EXTRUDE PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN
center_hole_diameter2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-291-3083
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60-P-31-144 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
616-3Interchangeable
interchangeable cross-reference
interchangeable
CGAS4645Interchangeable
interchangeable cross-reference
interchangeable
9802Interchangeable
interchangeable cross-reference
interchangeable
3483Interchangeable
interchangeable cross-reference
interchangeable
106450Interchangeable
interchangeable cross-reference
interchangeable
110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-P-31-144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-P-31-144?
60-P-31-144 is a O-RING.
What parts can replace 60-P-31-144?
There are 32 known substitutes for 60-P-31-144: 616-3, CGAS4645, 9802 and 29 more. Substitute compatibility should be verified for your specific system.
Is 60-P-31-144 still available?
60-P-31-144 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-P-31-144

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026