PartsTable
Technical Data Sheet
106450 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- For comfortable working and for protecting the iPad Air 2/Pro 9.7" from dirt, dust and scratches<br>- Reversible bag: one bag - two styles<br>- Stand function for easy positioning of the iPad<br>- Openings for full access to connections and controls<br>- Modern, slim design<br>- The device can remain in the case while being used This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-3858, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 106450
NSN: 5330-00-078-3858
FSC: 5330
CAGE: 89564 — VULCAN-HART CORP (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleBUSHING MOUNT
body_width0.635 INCHES MAXIMUM IN
body_height0.890 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
body_length1.270 INCHES MAXIMUM IN
thread_class2A A
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
body_diameter0.520 INCHES NOMINAL IN
actuator_styleROUND
bushing_length0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_length1.270 INCHES MAXIMUM IN
NSN5330-00-078-3858
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 106450 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
616-3Interchangeable
interchangeable cross-reference
interchangeable
CGAS4645Interchangeable
interchangeable cross-reference
interchangeable
9802Interchangeable
interchangeable cross-reference
interchangeable
110Interchangeable
interchangeable cross-reference
interchangeable
130100Interchangeable
interchangeable cross-reference
interchangeable
B107.500Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 106450?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106450?
106450 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 106450?
There are 29 known substitutes for 106450: 616-3, CGAS4645, 9802 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 106450?
106450 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-3858. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106450