PartsTable
Technical Data Sheet
PartsTable / O-RING / 5M.3882.220.11
5M.3882.220.11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 5M.3882.220.11 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-806-3197, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5M.3882.220.11
NSN: 5331-00-806-3197
FSC: 5331 — O-RING
CAGE: D1901 — HENSOLDT SENSORS GMBH DIV SEPS (DEU)
SPECIFICATIONS
Part Number5M.3882.220.11
NSN5331-00-806-3197
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5M.3882.220.11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
TEMP RATING-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
AS119Interchangeable
interchangeable cross-reference
interchangeable
ABS3302Interchangeable
interchangeable cross-reference
interchangeable
AS568-047Interchangeable
interchangeable cross-reference
interchangeable
MS90064-6ESInterchangeable
interchangeable cross-reference
interchangeable
3085Interchangeable
interchangeable cross-reference
interchangeable
6015199Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5M.3882.220.11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5M.3882.220.11?
5M.3882.220.11 is a 5M.3882.220.11.
What parts can replace 5M.3882.220.11?
There are 30 known substitutes for 5M.3882.220.11: AS119, ABS3302, AS568-047 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5M.3882.220.11?
5M.3882.220.11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-806-3197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5M.3882.220.11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026