PartsTable
Technical Data Sheet
PartsTable / O-RING / MS90064-6ES
MS90064-6ES ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, center_hole_diameter: 1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN, cross-sectional_height: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-543-6478, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90064-6ES
NSN: 5331-00-543-6478
FSC: 5331 — O-RING
CAGE: H2313 — ERIKS B.V. (NLD)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
center_hole_diameter1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
cross-sectional_height0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
NSN5331-00-543-6478
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS90064-6ES MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
308B308FInterchangeable
interchangeable cross-reference
interchangeable
3-9306Interchangeable
interchangeable cross-reference
interchangeable
308B5Interchangeable
interchangeable cross-reference
interchangeable
3085Interchangeable
interchangeable cross-reference
interchangeable
HS50726K2915Interchangeable
interchangeable cross-reference
interchangeable
308-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS90064-6ES?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90064-6ES?
MS90064-6ES is a O-RING.
What parts can replace MS90064-6ES?
There are 23 known substitutes for MS90064-6ES: 308B308F, 3-9306, 308B5 and 20 more. Substitute compatibility should be verified for your specific system.
Is MS90064-6ES still available?
MS90064-6ES is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90064-6ES

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026