The Heat Sink-Insulator, cataloged under National Stock Number 5999-01-202-9732, is classified within Federal Supply Class 5999 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use. Government technical data includes 16 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5999-01-202-9732 |
| Primary Part Number | NAS4117C38 |
| Item Name | Heat Sink-Insulator |
| FSC / FSG | 5999 / 59 — No Item Name Available |
| Manufacturer | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 3 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY |
| Test Data Document | 81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Accommodated Device Mounting Hole Pattern Style | SEVEN HOLE |
| Specification/standard Data | 81349-MIL-H-87111/01 GOVERNMENT SPECIFICATION |
| Accommodated Device Mounting Hole Quantity | 7 |
| Unthreaded Mounting Hole Diameter | 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM SECOND MOUNTING FACILITY IN |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY |
| Unthreaded Mounting Hole Diameter | 0.267 INCHES MINIMUM AND 0.297 INCHES MAXIMUM FIRST MOUNTING FACILITY IN |
| Mounting Facility Type and Quantity | 3 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY |
| Test Data Document | 81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Accommodated Device Mounting Hole Pattern Style | SEVEN HOLE |
| Specification/standard Data | 81349-MIL-H-87111/01 GOVERNMENT SPECIFICATION |
| Accommodated Device Mounting Hole Quantity | 7 |
| Unthreaded Mounting Hole Diameter | 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM SECOND MOUNTING FACILITY IN |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY |
| Unthreaded Mounting Hole Diameter | 0.267 INCHES MINIMUM AND 0.297 INCHES MAXIMUM FIRST MOUNTING FACILITY IN |
| Acquisition Status | ACTIVE |
| Successor | 5999-01-150-8828 |
| HAZMAT | No |
| Shelf Life Code | 0 |
| Criticality Code | Q |
| Unit of Issue | EA |
| SMR Code | JN |
| Weight | 0.0250 lbs |
| Cube | 0.0055 cu ft |
| Part Number | Manufacturer |
|---|---|
| M87111/01-4Y18 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| NAS4117 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
| MIL-H-87111/1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M87111/01-6Y38 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| NAS4117C38 PRIMARY | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
NSN 5999-01-202-9732 is a Heat Sink-Insulator, manufactured by National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use, classified under FSC 5999 (No Item Name Available). Status: active.
NSN 5999-01-202-9732 has 5 cross-referenced part numbers: M87111/01-4Y18 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), NAS4117 (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use), MIL-H-87111/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M87111/01-6Y38 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), NAS4117C38 (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use).
There are 12 known substitutes for 5999-01-202-9732: 5999-01-150-8828, 5999-01-177-2887, 5999-01-197-2731 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for NAS4117C38: Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY; Overall Length: 0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN; Test Data Document: 81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Accommodated Device Mounting Hole Pattern Style: SEVEN HOLE. 24 total characteristics are documented in the Federal Logistics Information System.