PartsTable
Technical Data Sheet
PartsTable / MRO / NAS4117C38
NAS4117C38 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The NAS4117C38 is a the manufacturer industrial component. Key specifications include overall_width: 0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN, overall_height: 0.008 INCHES MINIMUM AND 0.008 INCHES MINIMUM AND 0.010 INCHES MAXIMUM0.010 INCHES MAXIMUM IN, overall_length: 0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN, special_features: BORON NITRIDE-FILLED SILICONE RUBBER, specification/standard_data: 81349-MIL-H-87111/01 GOVERNMENT SPECIFICATION, unthreaded_mounting_hole_diameter: 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM SECOND MOUNTING FACILITY IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-202-9732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ NAS4117C38
NSN: 5999-01-202-9732
FSC: 5999
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
overall_width0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN
overall_height0.008 INCHES MINIMUM AND 0.008 INCHES MINIMUM AND 0.010 INCHES MAXIMUM0.010 INCHES MAXIMUM IN
overall_length0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN
special_featuresBORON NITRIDE-FILLED SILICONE RUBBER
specification/standard_data81349-MIL-H-87111/01 GOVERNMENT SPECIFICATION
unthreaded_mounting_hole_diameter0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM SECOND MOUNTING FACILITY IN
mounting_facility_type_and_quantity3 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
accommodated_device_mounting_hole_quantity7
accommodated_device_mounting_hole_pattern_styleSEVEN HOLE
NSN5999-01-202-9732
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN NAS4117C38 MFR NAS4117C38
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 3 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
•
TEST DATA DOCUMENT: 81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
ACCOMMODATED DEVICE MOUNTING HOLE PATTERN STYLE: SEVEN HOLE
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-87111/01 GOVERNMENT SPECIFICATION
•
ACCOMMODATED DEVICE MOUNTING HOLE QUANTITY: 7
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITY TYPE AND QUANTITY3 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
OVERALL LENGTH0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-H-87111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
ACCOMMODATED DEVICE MOUNTING HOLE PATTERN STYLESEVEN HOLE
SPECIFICATION/STANDARD DATA81349-MIL-H-87111/01 GOVERNMENT SPECIFICATION
OVERALL WIDTH0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN
SPECIAL FEATURESBORON NITRIDE-FILLED SILICONE RUBBER
ACCOMMODATED DEVICE MOUNTING HOLE QUANTITY7
UNTHREADED MOUNTING HOLE DIAMETER0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM SECOND MOUNTING FACILITY IN
OVERALL HEIGHT0.008 INCHES MINIMUM AND 0.008 INCHES MINIMUM AND 0.010 INCHES MAXIMUM0.010 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MIL-M-87111/1Upgraded Successor
successor cross-reference
successor
M87111/1-1H03Upgraded Successor
successor cross-reference
successor
M87111/01-1H03Upgraded Successor
successor cross-reference
successor
M87111/01-1H02Upgraded Successor
successor cross-reference
successor
M87111/1-H02Upgraded Successor
successor cross-reference
successor
M87111/1-1H0Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy NAS4117C38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS4117C38?
NAS4117C38 is a NAS4117C38. It is classified as a MRO (MRO_GENERAL).
What parts can replace NAS4117C38?
There are 23 known substitutes for NAS4117C38: MIL-M-87111/1, M87111/1-1H03, M87111/01-1H03 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS4117C38?
NAS4117C38 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-202-9732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS4117C38

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026