The Synchro,transmitter, cataloged under National Stock Number 5990-01-032-0710, is classified within Federal Supply Class 5990 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 12 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 7 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5990-01-032-0710 |
| Primary Part Number | M20708/6-02C |
| Item Name | Synchro,transmitter |
| FSC / FSG | 5990 / 59 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | CANCELLED |
| Shoulder Diameter | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN |
| Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN |
| Body Style | STANDARD ROUND B |
| Undercut Width | 0.0620 INCHES NOMINAL IN |
| Flange Thickness | 0.0930 INCHES NOMINAL IN |
| Flange Diameter | 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN |
| Length | 0.0620 INCHES NOMINAL SHOULDER IN |
| Phase Shift Angle in Deg | 4.000 INPUT TO OUTPUT NOMINAL |
| Plus J Zss Reactance in Ohms | 17.00 MINIMUM AND 24.00 MAXIMUM |
| Alignment Hole Quantity | 4 |
| Shaft Slot Width | 0.0200 INCHES NOMINAL SINGLE SHAFT IN |
| Test Data Document | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Shaft Type | ROUND, SLOTTED SINGLE SHAFT |
| Actuator Friction Torque at Plus 25 Deg Celsius | 0.07 INCH-OUNCES MAXIMUM IN |
| Shaft Slot Depth | 0.0250 INCHES NOMINAL SINGLE SHAFT IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Size | 11 |
| Rotor Input Electrical Power Rating | 1.0 WATTS NOMINAL |
| Torque Gradient Per Angular Deg | 0.008 INCH-OUNCES MINIMUM IN |
| Terminal Type and Quantity | 5 WIRE LEAD |
| Specification/standard Data | 81349-MIL-S-20708/6 GOVERNMENT SPECIFICATION |
| Zss Resistance in Ohms | 3.30 MINIMUM AND 4.20 MAXIMUM |
| Terminal Location | REAR |
| Maximum Temp Rise | 20.0 CELSIUS DEGC |
| Rotor Input Current Rating | 280.0 MILLIAMPERES NOMINAL |
| Shaft Length | 0.3680 INCHES NOMINAL SINGLE SHAFT IN |
| Body Material | STEEL CORROSION RESISTING |
| Electrical Error Angular Range in Minutes | -7.0 TO 7.0 |
| Frequency in Hertz | 400.0 NOMINAL |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| M20708/6D-002 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 26V-11TX4C | Kearfott Corp Div Kearfott Corporation (USA) |
| AS20708/6 | Sae International Dba Sae International (USA) |
| MIL-S-20708/6 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 26-11TX4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M20708/6-02C | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 11CX4E | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M20708/6-002 | Moog Inc. (USA) |
| M20708/6-02C PRIMARY | Sae International Dba Sae International (USA) |
| AS20708/6 | Society of Automotive Engineers Inc (USA) |
| M20708/6-02C | Society of Automotive Engineers Inc (USA) |
| SAE-AS20708/6 | Sae International Dba Sae International (USA) |
NSN 5990-01-032-0710 is a Synchro,transmitter, manufactured by Sae International Dba Sae International, classified under FSC 5990 (No Item Name Available). Status: cancelled.
NSN 5990-01-032-0710 has 12 cross-referenced part numbers: M20708/6D-002 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 26V-11TX4C (Kearfott Corp Div Kearfott Corporation), AS20708/6 (Sae International Dba Sae International), MIL-S-20708/6 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 26-11TX4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 7 more.
There are 7 known substitutes for 5990-01-032-0710: 5990-00-170-4239, 5990-00-206-3753, 5990-00-477-1362 and 4 more. Verify interchangeability with system specifications before substitution.
Key specifications for M20708/6-02C: Shoulder Diameter: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN; Overall Length: 3.3720 INCHES MAXIMUM IN; Pilot Diameter: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN; Body Style: STANDARD ROUND B. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5990-01-032-0710 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.